Mercedes 722.9 Conductor Plate Repair | 7G-Tronic VGS

Description

Mercedes-Benz 722.9 7G-Tronic Conductor Plate Repair

Is your Mercedes-Benz experiencing transmission faults, incorrect gear selection, limp mode, harsh or abnormal shifting, or transmission-related fault codes?

ECU Medics offers a mail-in Mercedes 722.9 conductor plate repair service for the electronic conductor plate / VGS (transmission control electronics) used in the Mercedes-Benz 7G-Tronic 722.9 automatic transmission.

Instead of purchasing an expensive replacement conductor plate, send us your existing unit for professional testing and repair.

Common Mercedes 722.9 Conductor Plate Symptoms

A failed or malfunctioning VGS/conductor plate can cause symptoms such as:

• Transmission stuck in limp mode
• Transmission will not shift correctly
• Transmission stuck in one gear
• Incorrect gear displayed on the instrument cluster
• Gear selection problems
• Harsh or abnormal shifting
• Transmission warning message
• Check Engine or transmission warning light
• Communication faults with the transmission control unit
• Transmission-related diagnostic trouble codes (DTCs)
• Vehicle starts but transmission does not operate normally

Important: These symptoms can have multiple causes. A conductor plate failure is not guaranteed simply because one of these symptoms is present. Proper diagnosis should be performed before sending your unit for repair.

Common Mercedes 722.9 Conductor Plate Error Codes

• Error code 0718 The component Y3 / 8n1 (turbine speed sensor (VGS)) is defective.
• Error Code 0717 The signal from component Y3 / 8n1 (turbine speed sensor (VGS)) is unavailable.
• Error code 2767 The signal from component Y3 / 8n2 (Internal speed sensor (VGS)) is unavailable.
• Error code 2768 The component Y3 / 8n2 (Internal speed sensor (VGS)) is defective.
• Fault code P 0705 The signal from component Y3/8s1 ( Selection range sensor (VGS)) is not available

Compatible Mercedes-Benz 722.9 Applications

This service is intended for Mercedes-Benz vehicles equipped with the 722.9 / 7G-Tronic automatic transmission, including many:

• Mercedes-Benz CLS350
• Mercedes-Benz CLS500
• Mercedes-Benz E350
• Mercedes-Benz G-Class
• Mercedes-Benz M-Class
• Mercedes-Benz R-Class
• Mercedes-Benz SLK-Class

Compatibility depends on the specific vehicle, transmission and conductor plate/VGS version. Please provide your VIN and/or conductor plate information before ordering if you are unsure about compatibility.

How the Mail-In Repair Service Works

1. Purchase the service
Place your order through our website.

2. Remove the conductor plate
Remove the 722.9 transmission conductor plate/VGS from your vehicle.

3. Ship it to ECU Medics
Package the unit securely and send it to our facility.

4. We test and repair the unit
Our technicians inspect the conductor plate and perform the applicable electronic repair.

5. Your repaired unit is returned
Once the repair is complete, your original conductor plate is shipped back to you.

Repair Your Original 722.9 Conductor Plate

Repairing your existing VGS/conductor plate can be an alternative to purchasing a replacement unit. Your original unit also avoids the need to simply replace the component without first determining whether the electronics can be repaired.

This is a repair service for your existing conductor plate. It is not a replacement conductor plate.

Before Ordering

Please make sure your vehicle is equipped with the Mercedes-Benz 722.9 / 7G-Tronic transmission.

If possible, include the following with your order:

• Vehicle VIN
• Mercedes-Benz model and year
• Transmission fault codes
• Description of the transmission symptoms
• Part number or photos of the conductor plate, if available

If you are unsure whether your problem is caused by the conductor plate, contact us before ordering. We can help determine whether this service is appropriate based on the symptoms and diagnostic information available.

Mail-In Service | Mercedes-Benz 722.9 | 7G-Tronic | VGS | Conductor Plate Repair